Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Exploring Digital Gingival Shade Matching in Students.

PURPOSE: To study the degree of accuracy in gingival shade matching of undergraduate students using a computer application. MATERIALS AND METHODS: In total, 76 undergraduate dental students' gingival shade selection abilities were evaluated using an in-house developed computer application. A total of 15 intraoral gingival photographs and 21 pink gingival color porcelain samples were used. The environmental conditions were standardized, and no time limit was set for answering in the computer application. RESULTS: Fourteen gingival color samples (66.6%) were not useful for representing the studied gingival shades. Not all natural gingival colors studied were represented within the 50.50% acceptability limits of the pink samples. There were no statistically significant differences between men and women in terms of "hit" percentages. The highest correlation coefficient (in absolute value) was for the L* coordinate (the darker the gingiva in the picture, the higher the hit rate for choosing the "ideal" shade tab); however, none of the linear correlation coefficients were statistically significant. CONCLUSIONS: Not all colors provided in the pink ceramic system were useful for subjective gingival selection. There were no statistically significant differences between male and female dental students in gingival color perception. The L* coordinate was the only one that influenced the correct perception of gingival color by dental students, and it did so more in women than in men.

Trueness and precision of an intraoral scanner on abutments with subgingival vertical margins: An in vitro study.

OBJECTIVES: This study aimed to evaluate the accuracy of an intraoral scanner (IOS - Medit i700) on tooth abutments with vertical preparations at 2 depths below the free gingival margin, and to determine if the IOS can reproduce the area beyond the finish surface of the tested preparation geometry. METHODS: Two abutments for a maxillary first molar were designed by means of CAD software, with vertical preparations set at 1 and 2 mm below the gingiva. These abutments were subsequently printed in resin and placed on a reference model. The reference files consisted of scans made using a metrological machine on these abutments. Ten scans were made with the tested IOS on each sample, resulting in two study groups. The scans from the experimental groups were labeled "V-1″ for vertical preparation at 1 mm below the gingival margin and "V-2″ for 2 mm below. The analysis of these scans was performed using Geomagic Control X (3D SYSTEMS) to assess their trueness and precision in µm. Descriptive statistics with a 95 % confidence interval were employed, alongside independent sample tests, to ascertain any differences between the groups (α=0.05). RESULTS: Statistically significant differences were not found both for trueness (p=.104) and precision (p=.409), between the tested geometries. The mean values for trueness were V-1 = 37.5[31.4-43.6]; V-2 = 32.6[30.6-34.6]. About the precision, the mean values were V-1 = 20.5[8.4-32.5]; V-2 = 18.4[8.2-28.5]. In both the study groups, it was possible to detect the surface beyond the finish area. CONCLUSIONS: Within the limitations of this study, vertical preparation design allows for registration of the tooth anatomy beyond the finish area with IOS. Moreover, the mean accuracy values were clinically acceptable at both 1 and 2 mm below the gingival margin.

Gingival thickness and gingival width in children: a cross-sectional study utilizing ultrasonography.

PURPOSE: To measure the gingival phenotype-related features, gingival thickness (GT) and gingival width (GW), in healthy children and to investigate their association between them, with age, gender, tooth-type and arch. METHODS: The gingival sites of 1029 teeth were included from 64 children (36 males and 28 females), with primary and mixed dentition, attending the paediatric dental clinic of Aristotle University, Thessaloniki. GT and GW were measured ultrasonically and with a periodontal probe, respectively. Mixed effects linear regression models were used to evaluate the association of gingival thickness and gingival width with the under-investigation parameters. Spearman's correlation coefficient was used to evaluate correlation between GT and GW. RESULTS: Significantly thicker gingiva is found in posterior teeth compared to anterior teeth, in permanent teeth versus primary teeth and in maxillary teeth in comparison to mandibular teeth (p value < 0.001). Regarding GW, significantly wider gingiva is noted in posterior regions (p value = 0.022) and the maxilla (p value < 0.001). Gender-wise and concerning age GT and GW are not significantly affected. A weak and positive correlation between GT and GW is noted (rho 0.30, p < 0.001). CONCLUSIONS: GT and GW present significant associations with arch and tooth-type. Findings from this study fulfil the further understanding of GT and GW of paediatric patients that are investigated sparsely throughout the literature and demonstrate an accurate, painless and simple method to map the gingiva.

Ultrasonography-Derived Elasticity Estimation of Live Porcine Oral Mucosa.

OBJECTIVES: To investigate the biomechanical properties of porcine oral tissues with in vivo ultrasonography and to compare the difference between oral alveolar mucosa and gingival tissue concerning compressional and tensile mechanical strain. MATERIALS AND METHODS: Sinclair minipigs (6 females and 4 males, 6 to 18 months of age) were anesthetized for ultrasonography. In vivo high-frequency tissue harmonic ultrasound (12/24 MHz) cine-loops were obtained while inducing mechanical tissue stress (0 to 1 N). Post-processing strain analysis was performed in a cardiac speckle tracking software (EchoInsight®). Region of interest (ROI) was placed for gingival and alveolar mucosa tissues for longitudinal (compressional) and tensile strain analyses. A calibrated gel pad was employed to determine the absolute force (pressure) for the measured tissue strain response function. The resulting elasticity data was statistically analyzed using custom Matlab scripts. RESULTS: In total, 38 sonography cine-loops around the third premolars were included in the investigation. The longitudinal strain of alveolar mucosa ε AM L was found to be significantly (P < .05) larger than that of gingiva ε G L . Across the measured force range, ε AM L ~ 1.7 × Îµ G L . Significant differences between alveolar mucosa and gingiva tissues were found for all forces. The tensile strain of the alveolar mucosa ε AM T was found to be ~2 × Îµ G T (on the epithelial surface of the gingiva). Both were statistically significantly different for forces exceeding ~0.08 N. At depth, that is, 500 and 1000 µm below the epithelial surface, the gingiva was found to have less ability to stretch contrary to the alveolar mucosa. Gingival tissue at 500 µm depth has significantly less tensile strain than at its surface and more than at 1000 µm depth. In contrast, the tensile strain of alveolar mucosa is largely independent of depth. CONCLUSION: Ultrasonography can reveal significant differences in oral alveolar mucosal and gingival elastic properties, such as compressional and tensile strain. Under minute forces equivalent to 10 to 40 g, these differences can be observed. As dental ultrasound is a chairside, and noninvasive modality, obtaining real-time images might soon find clinical utility as a new diagnostic tool for the objective and quantitative assessment of periodontal and peri-implant soft tissues in clinical and research realms. As ultrasound is a safe modality with no known bioeffects, longitudinal monitoring of areas of concern would be particularly attractive.

Comparative evaluation of pinhole surgical technique with and without A-PRF in the treatment of multiple adjacent recession defects: A clinico radiographic study.

BACKGROUND: To evaluate and compare efficacy of pinhole surgical technique (PST) alone and with advanced platelet rich fibrin (A-PRF) in the management of bilateral multiple adjacent gingival recession defects (MAGRD). METHODS: One hundred and sixty five MAGRD were randomly assigned to control group (treated with PST) and test group (PST with A-PRF). Clinical parameters of gingival recession depth (GRD), gingival recession width (GRW), width of keratinised gingiva (WKG), complete root coverage (CRC) and gingival thickness (GT) on ST-CBCT was measured at 2, 4 and 6 mm apically from the gingival margin. Also, root coverage aesthetic score and patient satisfaction ratings were recorded at baseline, 6 and 12 months postoperatively. RESULTS: Substantial reduction in GRD (Test: 1.29 ± 0.69 mm and Control 0.98 ± 0.30 mm) (p < 0.001) and GRW (Test: 2.03 ± 0.90 mm and control 1.73 ± 0.99 mm) (p < 0.05) with associated gain in WKG and GT was observed (p < 0.001). Mean GT values were increased in both the groups at 2, 4 and 6 mm from the crest. Comparison of Test and Control groups yielded significant reductions in GRD (-0.17 ± 0.56 mm) and WKG (0.73 ± 1.07 mm) favoring the Test group (p < 0.05). Similar increase in GT was observed with better results in Test than control group. (p < 0.001). CONCLUSION: Both groups exhibited sound clinical outcomes with test group offering better resolution of MAGRD in comparison to control group. Also, it enhances clinical and therapeutic end results in terms of attaining reduction in GRD and GRW along with greater gain in KTW and GT. CLINICAL SIGNIFICANCE: PST as a minimally invasive approach has numerous benefits, some of which include the absence of scarring and improved aesthetics linked to faster wound healing. The addition of A-PRF enhances the intended therapy outcomes, which is beneficial for both patients and professionals in the field of periodontics.

A novel approach for gingiva thickness measurements around lower anterior teeth by means of dental magnetic resonance imaging.

OBJECTIVE: This diagnostic accuracy study aims to present the first measurements of gingiva thickness around lower anterior teeth using dental magnetic resonance imaging (MRI) and to compare these measurements with two established methods: (1) gingival phenotype assessment via periodontal probing, and (2) the superimposition of cone-beam computed tomography (CBCT) scans with intraoral scans of teeth and gums. MATERIALS AND METHODS: Ten patients with substantial orthodontic treatment need and anterior mandibular crowding were consecutively included in this clinical case series. After periodontal probing, each patient underwent a CBCT scan, an intraoral scan of the mandible, and an MRI investigation using a novel mandibula 15-channel dental coil. RESULTS: The mean gingiva thickness was 0.72 mm measured on MRI and 0.97 mm measured on CBCT, with a mean difference between the measurement methods of 0.17 ± 0.27 mm (p < 0.001). Measurement agreement between the index tests (MRI and CBCT) and the clinical reference standard (probing) yielded an overall percent agreement of 64.94% and 47.02% for MRI and CBCT, respectively. Teeth with thin phenotypes were associated with lower soft tissue dimensions in both free (MRI: 0.56 mm vs. CBCT: 0.79 mm) and supracrestal gingiva (MRI: 0.75 mm vs. CBCT: 1.03 mm) when compared to those with thick phenotypes. However, only the measurements obtained from MRI scans showed statistically significant differences between the two phenotypes. CONCLUSION: Dental MRI successfully visualizes delicate structures like the gingiva in the anterior mandible and achieves a high correlation with superimposed CBCT scans, with clinically acceptable deviations. CLINICAL RELEVANCE: The present study helps to establish dental MRI as a radiation-free alternative to conventional radiographic methods.

Evaluation Of Gingival Biotype And Recession Following Non-Surgical Periodontal Treatment Using 3-Dimensional Scan Methods.

The study evaluated the position of gingival margins in anterior teeth using clinical and 3-dimensional (3D) optical scanning method among patients subjected to non surgical periodontal treatment (NSPT). A single arm, longitudinal study was undertaken at the Archway Dental Center, University of Manchester, UK. History and clinical examination were done. Gingival recession, attachment loss (AL), and periodontal probing depth (PD) were recorded at baseline and 12-weeks follow-up. NSPT was done using hand and ultrasonic instruments. Impressions were made, the resultant gypsum models were scanned to generate 3D images. The change in the gingival level and thickness of facial gingiva were assessed. Out of eight patientsrecruited, three were lost to follow up. The 3D scan showed a poor correlation with the clinical assessment of gingival recession in anterior teeth following NSPT (r=- 0.0089). Recession did not improve after NSPT (p= 0.20).

[Clinical and radiographic effect of simultaneously labial and lingual augmented corticotomy: a prospective case series study].

Objective: To investigate soft-and hard-tissue changes after simultaneously labial and lingual augmented corticotomy in patients with insufficient alveolar bone thickness of lower anterior teeth both in labial and lingual side during orthodontic treatment. Methods: From January 2021 to June 2022, 10 patients [2 males and 8 females, (26.2±3.1) years old] who received orthodontic and orthognathic combined treatment from the Fourth Clinical Division, Peking University School and Hospital of Stomatology were selected. The alveolar bone thickness of lower anterior teeth both in labial and lingual side in these patients was less than 0.5 mm according to cone-beam CT examination before or during treatment, and 60 lower anterior teeth were included. The 10 patients were treated with simultaneously labial and lingual augmented corticotomy. The differences in gingival recession, papilla index and the differences in labial and lingual alveolar bone thickness of lower anterior teeth were compared. Results: Six months after surgery, the alveolar bone thicknesses at the 4 mm under cemento-enamel junction (CEJ), 8 mm under CEJ and at the apical level [labial side: (1.02±0.39), (2.22±0.89) and (4.87±1.35) mm; lingual side: (1.07±0.46), (2.31±1.04) and (3.91±1.29) mm] were significantly higher than that before surgery [labial side: (0.02±0.09), (0.06±0.21) and (2.71±1.33) mm]; lingual side: (0.14±0.29), (0.40±0.52) and (2.13±1.02) mm] (P<0.001), respectively. The increases in alveolar bone thickness of central incisors [apical level on labial side: (2.53±1.20) mm, 8 mm under CEJ on lingual side: (2.27±1.24) mm, apical level on lingual side: (2.66±1.49) mm] and lateral incisors [apical level on labial side: (2.42±1.30) mm, 8 mm under CEJ on lingual side: (2.28±0.92) mm, apical level on lingual side: (1.94±1.15) mm] were significantly higher than that of canines [apical level on labial side: (1.52±1.47) mm, 8 mm under CEJ on lingual side: (1.17±1.09) mm,apical level on lingual side: (0.74±1.37) mm] (P<0.01). There were no significant differences in the degree of gingival recession [labial side before surgery: (0.72±0.88) mm, lingual side before surgery: (0.80±1.09) mm; labial side 6 months after surgery: (0.72±0.81) mm,lingual side 6 months after surgery: (0.89±0.21) mm] and gingival papilla index [before surgery: 1.00(0.75, 2.00); 6 months after surgery: 1.00(1.00, 2.00) ] between pre-operation and 6 months after surgery (P>0.05). No serious complications occurred. Conclusions: The method used in this article for simultaneously labial and lingual augmented corticotomy was safe and feasible. This surgery has positive clinical significance for the stability of the periodontal tissue in orthodontic treatment for patients with alveolar bone thickness less than 0.5 mm of lower anterior teeth both in labial and lingual side.

An evaluation of gingival phenotype and thickness as determined by indirect and direct methods.

OBJECTIVES: To evaluate gingival phenotype (GP) and thickness (GT) using visual, probing, and ultrasound (US) methods and to assess the accuracy and consistency of clinicians to visually identify GP. MATERIALS AND METHODS: The GP and GT of maxillary and mandibular anterior teeth in 29 orthodontic patients (mean age 25 ± 7.5 years) were assessed using probing and US by a single examiner. General dentist and dental specialist assessors (n = 104) were shown intraoral photographs of the patients, including six repeated images, and asked to identify the GP via a questionnaire. RESULTS: An increasing trend in GT values of thin, medium, and thick biotype probe categories was found, though this was not statistically significant (P = .188). Comparison of probing method to determinations of GT made by US yielded slight agreement (κ = 0.12). Using the visual method, assessors' identification of the second GP determination ranged from poor to moderate agreement (κ = 0.29 to κ = 0.53). CONCLUSIONS: The probe method is sufficient in differentiating between different categories of GP. However, further research is required to assess the sensitivity of the probe method in recognizing phenotypes in the most marginal of cases. Assessors using the visual method lack the ability to identify GP accurately and consistently among themselves.

[Three-dimensional gingival morphology in the aesthetic zone of maxillary anterior teeth: a cone-beam CT analysis].

PURPOSE: To measure and investigate the relationship of three-dimensional gingival morphology on the labial side of the maxillary anterior teeth by using cone-beam CT(CBCT) in conjunction with a novel radiocontrast agent. METHODS: Thirty periodontal healthy subjects were enrolled. The composition of light-cured gingival barrier resin and iohexol injection was applied to the measurement area, then a positioning wire was set up, and CBCT was used to assess supracrestal gingiva tissue (SGT), gingiva thickness (GT) and width of keratinized gingiva (KGW). The differences in each parameter between different gingival biotypes were compared. SPSS 25.0 software package was used for data analysis. RESULTS: The mean distance of SGT was greater for central incisors than canines (P＜0.05). The central incisors had the thickest GT in the maxillary anterior region, while the canines had the thinnest(P＜0.01). The GT of male central and lateral incisors was significantly thicker than that of females(P＜0.05), and the KGW was significantly wider than that of canines (P＜0.05). GT-SGT, KGW-SGT and GT-KGW all had a positive correlation (r=0.315, 0.287,0.406, P＜0.01). The thick gingival type was greater than the thin gingival type in the KGW of lateral incisors and canines and the SGT height of canines (P＜0.05). CONCLUSIONS: There were significant differences in the measuring results of GT, KGW, and SGT in the maxillary anterior region under different gingival biotypes, and individualized treatment strategies can be formulated based on gingival biotypes.

Effect of craniofacial morphology on gingival parameters of mandibular incisors.

OBJECTIVES: To investigate the association between the width of keratinized gingiva (WKG), gingival phenotype (GP), and gingival thickness (GT) with craniofacial morphology in sagittal and vertical dimensions. MATERIALS AND METHODS: WKG, GP, and GT of mandibular anterior teeth in 177 preorthodontic patients (mean age 18.38 ± 5.16 years) were assessed clinically using a periodontal probe, a Colorvue Biotype Probe, and ultrasound by a single examiner. Patients were grouped into skeletal Class I, II, and III and hyperdivergent, normodivergent, and hypodivergent based on ANB and SN-MP angles. Mandibular incisor inclination (L1-NB) was also measured. Clinical and cephalometric measurements were repeated to assess inter- and intraexaminer reproducibility. RESULTS: A significant association was found between thin GP and skeletal Classes I and III for the left mandibular central incisor (MCI; P = .0183). In skeletal Class III patients, L1-NB angle demonstrated a decreasing trend as phenotype thickness decreased. A significant association was found between thin phenotype and normodivergent and hypodivergent groups for MCIs (left: P = .0009, right: P = .00253). No significant association between WKG or GT and craniofacial morphology was found. CONCLUSIONS: Thin GP is associated with skeletal Class I and III for the left MCI. Thin GP is associated with hypodivergent and normodivergent skeletal patterns for the MCIs. There was no association between WKG and GT and craniofacial morphology in both skeletal and vertical dimensions. Dental compensations that exist due to different craniofacial morphology may influence the GP.

Coronally Advanced Flap with Xenogeneic Collagen Matrix for the Treatment of Gingival Recessions at Sites Presenting with Cervical Restorations or Noncarious Cervical Lesions: A Clinical and Ultrasonographic Study.

The aim of this prospective study was to evaluate the efficacy of a cross-linked xenogeneic volume-stable collagen matrix (CCM) in treating gingival recessions (GRs) at teeth presenting with cervical restorations or noncarious cervical lesions (NCCLs). Fifteen patients with esthetic concerns for multiple sites with GRs and cervical restorations were consecutively enrolled. The sites were treated with a coronally advanced flap (CAF) design in combination with a CCM. When present, the previous restoration was removed, and the cementoenamel junction was reconstructed with a composite material. The CCM was stabilized on the root surface(s) previously occupied by the restoration. The CAF was sutured to completely cover the graft. Clinical measurements and intraoral digital and ultrasonographic scans were collected at baseline and at 3 and 6 months postsurgery. Limited postoperative discomfort was reported by patients during the healing. The mean root coverage at 6 months was 74.81%. Average increases in gingival thickness of 0.43 mm and 0.52 mm were observed when measured with ultrasonography 1.5 mm and 3 mm apical to the gingival margin, respectively (P < .05). Relatively high patient-reported satisfaction and esthetics were associated with the treatment outcomes. The treatment resulted in a significant reduction in dental hypersensitivity (mean: 33 VAS points). The present study demonstrated that CAF + CCM is an effective approach for treating GRs at sites with cervical restorations or NCCLs. Int J Periodontics Restorative Dent 2023;43:147-154. doi: 10.11607/prd.6448.

A Novel 3D Volumetric Method of Analyzing Gingival Positional and Dimensional Alterations During Orthodontic Therapy: A Pilot Study.

The aim of the present study was to develop a 3D digital image-analysis method to quantitatively assess gingival changes after clear-aligner orthodontic therapy. Using teeth as fixed reference points, 3D image analysis tools have been used to quantify mucosal level changes after specific therapies. This technology has not been applied to orthodontic therapy, primarily because orthodontic tooth movement precludes using teeth as fixed reference points. Rather than superimposing the pre- and posttherapy volumes for the entire dentition, the methodology presented herein superimposed the pre- and post-therapy volumes for individual teeth. The lingual tooth surfaces, which remained unaltered, were used as fixed references. Intraoral scans taken before and after clear-aligner orthodontic therapy were imported for comparison. Volumes were created for each 3D image and were superimposed in a 3D image-analysis software that allowed quantitative measurements. The results demonstrated this technique's ability to measure very small changes in the apicocoronal position of the gingival zenith, as well as alterations of gingival margin thickness, following clear-aligner orthodontic therapy. The present 3D image-analysis method offers a useful tool for investigating the periodontal dimensional and positional changes that accompany orthodontic therapy.

Morphological changes in alveolar bone thickness and height after orthodontic proclination or labial movement combined with autogenous soft tissue grafting: a CBCT evaluation.

BACKGROUND: Autogenous soft tissue grafting is indicated in thin gingival biotypes before orthodontic proclination or labial movements to increase the keratinized gingiva and prevent gingival recession. However, its effect on local alveolar bone remodeling is unclear. The aim of this study was to investigate the effects of autogenous soft tissue grafting on local alveolar bone after orthodontic proclination or labial movements. METHODS: Sixteen patients with a thin scalloped gingival biotype, narrow keratinized gingiva, or thin cortical bone requiring orthodontic proclination or labial movement of teeth were included. Cone-beam computed tomography (CBCT) images were obtained before grafting and at least 6 months after surgery. Sixty mandibular teeth were included, and the vertical bone level and horizontal labial bone thickness were measured. The results were compared using paired t-tests or Wilcoxon signed-rank test. RESULTS: The horizontal labial bone thickness increased, especially at 6 mm below the cementoenamel junction (CEJ) in the mandibular central and lateral incisors (P < 0.05). The total alveolar bone area of the canines, first premolars, and second premolars increased at 3, 6, and 9 mm below the CEJ, respectively, and the differences were statistically significant (P < 0.05). Additionally, vertical bone height increased minimally on the labial side, but the differences were not statistically significant (P > 0.05). CONCLUSIONS: New bone regeneration was observed on the labial (pressure) side after autogenous soft tissue grafting, which may represent a mechanism to effectively prevent gingival recession and maintain periodontal health. IRB APPROVAL: All the experimental procedures involving humans in this study were approved by the Medical Ethics Committee of Xiangya Stomatological Hospital, Central South University ( No. 20190048).

Accurate gingival segmentation from 3D images with artificial intelligence: an animal pilot study.

BACKGROUND: Gingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and time-consuming procedure. This study aims to evaluate the feasibility and accuracy of an alternatively novel, non-invasive technology based on the precise 3-dimension (3D) soft tissue reconstruction from intraoral scanning and cone beam computed tomography (CBCT) to predict the gingival biotype. METHODS: As a proof-of-concept, Yorkshire pig mandibles were scanned, and the CBCT data were fed into a deep-learning model to reconstruct the teeth and surrounding bone structure in 3D. By overlaying the CBCT scan with the intraoral scans, an accurate superposition was created and used for virtual measurements of the soft tissue thickness. Meanwhile, gingival thicknesses were also measured by a periodontal probe and digital caliper on the buccal and lingual sides at 3 mm apical to the gingival margin of the posterior teeth and compared with the virtual assessment at the same location. The data obtained from virtual and clinical measurements were compared by Wilcoxon matched-pairs signed-rank analysis, while their correlation was determined by Pearson's r value. The Mann-Whitney U test was used for intergroup comparisons of the amount of difference. RESULTS: Among 108 investigated locations, the clinical and virtual measurements are strongly positively correlated (r = 0.9656, P < 0.0001), and only clinically insignificant differences (0.066 ± 0.223 mm) were observed between the two assessments. There is no difference in the agreement between the virtual and clinical measurements on sexually matured samples (0.087 ± 0.240 mm) and pre-pubertal samples (0.033 ± 0.195 mm). Noticeably, there is a greater agreement between the virtual and clinical measurements at the buccal sites (0.019 ± 0.233 mm) than at the lingual sites (0.116 ± 0.215 mm). CONCLUSION: In summary, the artificial intelligence-based virtual measurement proposed in this work provides an innovative technique potentially for accurately measuring soft tissue thickness using clinical routine 3D imaging systems, which will aid clinicians in generating a more comprehensive diagnosis with less invasive procedures and, in turn, optimize the treatment plans with more predictable outcomes.

Clinical and computed tomographic evaluations of periodontal phenotypes in a Chinese population: a cross-sectional study.

OBJECTIVES: To investigate the diagnostic value of probe transparency related to gingival thickness (GT) and keratinized gingival width (KGW) at individual and site levels and explore the relationship of buccal bone plate thickness (BT) with GT and KGW. MATERIALS AND METHODS: A total of 1,606 teeth from 167 patients with periodontally healthy maxillary anterior region were included. GT was measured with probe transparency and transgingival probing. KGW was measured directly. BTs were assessed at the level 1 mm apical to the alveolar crest (BT1) and midpoint of the root (BT2) and evaluated at individual and tooth levels along with their mutual associations. RESULTS: The prevalence of thick gingiva was 53% with probe transparency measurement and 51% with transgingival probing. The cutoff gingival thickness was 0.8 mm, which correlated moderately with a Cohen's kappa of 0.386. The mean GT, KGW, and BTs (BT1 and BT2) in the maxillary anterior region were 0.97 ± 0.46, 5.51 ± 1.62, 0.85 ± 0.31, and 0.79 ± 0.32 mm, respectively. GT and KGW correlated mildly (r = 0.261), and GT and BTs correlated moderately (BT1: r = 0.298; BT2: r = 0.338). GT and BTs differed significantly between men and women and among different tooth sites. CONCLUSIONS: GT and BTs correlated positively in the maxillary anterior region and varied within and among individuals. Sex was a factor influencing the gingival phenotype and bone morphotype. CLINICAL RELEVANCE: GT measured with transgingival probing, with a cutoff of 0.8 mm, could serve as an objective measure to distinguish different gingival phenotypes.

Relationship between supracrestal soft tissue dimensions and other periodontal phenotypic features: A cross-sectional study.

BACKGROUND: The purpose of this study was to determine the association between periodontal supracrestal soft tissue dimensions (PSSTDs) and other phenotypic features in non-molar maxillary teeth. MATERIALS AND METHODS: Adult subjects in need of comprehensive dental treatment were recruited. Periodontal phenotypic variables (i.e., facial and palatal gingival thickness [GT], alveolar bone thickness [BT], and PSSTDs, namely distance from the gingival margin to the bone crest defined as periodontal supracrestal tissue height [PSTH] and distance from the cementoenamel junction to the bone crest [CEJ-BC]) were recorded using cone-beam computed tomography scans. Standardized intraoral photographs were obtained to assess facial keratinized tissue width (KTW) and other anatomical parameters (i.e., tooth type, gingival architecture, and interproximal papilla height). RESULTS: The study sample was constituted of 87 participants that contributed with a total of 522 maxillary anterior teeth. Differences in mean values of PSSTDs, KTW, GT, and BT were observed between tooth types and sex. Males exhibited a thicker GT and BT, and taller PSTH and KTW compared to females. Shorter CEJ-BC was associated with shorter PSTH, wider KTW, and thicker GT and BT. Shorter PSTH was associated with thicker facial BT. Notably, BT and GT were positively correlated at both facial and palatal sites, meaning that the thicker the gingival phenotype, the thicker the bone morphotype. Facial BT and facial GT were positively correlated with KTW. A flat gingival architecture was associated with the thick periodontal phenotype. Square teeth had shorter CEJ-BC, wider KTW, and thicker GT. CONCLUSIONS: Periodontal phenotypic features vary across and within subjects, between facial and palatal sites at different apico-coronal levels, and as a function of sex and tooth type. The shorter the PSSTDs, the wider the KTW and the thicker the GT and BT. PSSTDs, particularly PSTH, should be considered an integral component of the periodontal phenotype.

Accuracy of cone-beam computed tomography in determining gingival thickness: a systematic review and meta-analysis.

OBJECTIVE: To assess the accuracy of cone-beam computed tomography (CBCT) for determining gingival thickness. MATERIAL AND METHODS: Searches were undertaken in PubMed/MEDLINE, EMBASE, LILACS, Web of Science, Scopus, LIVIVO, and gray literature (Google Scholar and ProQuest) for studies considered eligible according to the following criteria: cross-sectional observational studies, which compared CBCT accuracy with that of transgingival probing when determining gingival thickness, in adult patients with good periodontal health. No language or time restrictions were applied in this systematic review. The risk of bias was assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist for analytical cross-sectional studies. RESULTS: Six articles were included for qualitative synthesis, involving a pooled sample of 132 patients with a mean age of 29 years (18-51 years). Of these 6 studies, 5 were eligible for quantitative analysis. The meta-analysis showed no statistically significant difference between CBCT and transgingival probing measures of gingival tissue (mean difference of 0.10 (95% CI-0.17-0.38). No significant level of heterogeneity was detected (Tau2-P = 0.0662; I2 = 0%; H2-P = 1.000; Q-P = 1.134). According to the GRADE criterion, confidence in the cumulative evidence was considered low. CONCLUSIONS: CBCT is an accurate method for determining gingival tissue thickness, comparable to the reference standard (transgingival probing). CLINICAL RELEVANCE: CBCT could be considered for gingival thickness measurement when bone thickness is also needed, and thereby aid in the assessment of gingival biotype without the discomfort and anesthesia needed in transgingival probing. TRIAL REGISTRATION: This protocol was registered at the PROSPERO database (International Prospective Register of Systematic Review) under registration number CRD42022326970. Available from: https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42022326970 .